Saved Geofilter Sets allow you to save commonly used geographic targeting configurations and reuse them across multiple ad campaigns. Instead of manually rebuilding the same location filters for each campaign, you can apply saved sets with a single click.
Table of Contents
- Geofilters Are Required for Display Ad Campaigns
- What is a Geofilter Set?
- How Inclusions and Exclusions Work
- Choose Geofilters That Make Sense
- Create a Geofilter Set
- Setting a Default Geofilter Set
- Common Questions
Geofilters Are Required for Display Ad Campaigns
As of November 2026, display ad campaigns require geofilters, except for Mobile Geofencing campaigns. Geofilters keep your ad delivery inside the countries and regions you choose.
In the Filters step of the campaign wizard, choose Use a saved set or Use custom geofilters. You'll need at least one geofilter before you can move on to the next step.
Tip: The easiest way to meet the requirement is to save the locations you target most often as a Geofilter Set and assign it as your default. Your default set applies automatically to every new campaign, and you can still change it for any campaign.
Why Geofilters Are Required
Geofilters help your ad budget go toward the people and places that lead to the strongest performance. With geofilters in place, your ads:
- Stay in the regions you care about. Delivery concentrates in the places where your audience actually is.
- Show up on higher-quality sites. Your budget goes toward placements that lead to stronger performance.
- Reach more relevant people. Fewer impressions and clicks go to people who are too far away to engage with your organization.
What is a Geofilter Set?
A Geofilter Set is a saved collection of geographic targeting rules that you can apply to any ad campaign. Each set can include up to 50 Geofilters with the ability to both include and exclude locations, allowing you to define geographic targeting once and use it across multiple campaigns.
For example, if you regularly run campaigns targeting your service territory, you might create a "Service Area" Geofilter set containing all the countries, states, counties, or cities, or zip codes your organization serves. When creating new campaigns, you can select this set instead of manually entering each location again.
Check out the video below for a walkthrough, or skip down to the written instructions.
How Inclusions and Exclusions Work
Each location in a Geofilter Set is either included or excluded.
- Include a location to show your ads to people there.
- Exclude a location to keep your ads from showing to people there.
The core rule: Adding an inclusion filter automatically excludes everything outside of it. You don't need to manually add exclusions for locations that are outside of your inclusion, because they are already excluded by default.
Start with the locations you want to reach, then add exclusions only if you need to remove part of that area. For example, to reach people across Florida except in Jacksonville, include Florida and exclude Jacksonville.
Choose Geofilters That Make Sense
Before you add geofilters, ask yourself: where is my ideal audience located? A few things to keep in mind:
- Match your real audience. If your supporters live across the country, a single country filter may be all you need. If your audience is local, focus on the states, counties, cities, or zip codes you serve.
- Understand how inclusions and exclusions work. If you find yourself adding a long list of exclusions, take a step back. There's usually a shorter list of places you can include instead.
- Don't go narrower than you need to. Every geofilter makes your audience smaller, and ad campaigns need at least 2,000 people to serve impressions. Learn how geofilters affect your audience size.
- Watch for filters that cancel each other out. For example, including a city and then excluding the state it's in leaves no one to reach.
- Check your default set for each campaign. Your default set applies automatically. If a campaign has a different focus, like a conference in another city, switch to a set that fits.
Create a Geofilter Set
You can create a Geofilter Set in your account settings or directly in your campaign while you build it.
Create a Set in Account Settings
- Go to Account Settings > Account > Geofilters in your Feathr account.
- Click Create Set.
- Name your set. Use a name that clearly describes the locations, like "Major Donor Cities" or "Annual Conference Locations."
- Choose whether to make this your default set for future campaigns.
-
Add geofilters. You can filter by:
- Countries
- Regions, states, or provinces
- Counties
- Cities or towns
- Zip codes
- Include or exclude each location. See How Inclusions and Exclusions Work.
- Review your filters to make sure your set makes sense.
- Click Save.
Create a Set in Your Campaign
- In the Filters step of the campaign wizard, select Use custom geofilters.
- Add your geofilters and choose whether to include or exclude each location.
- Click Save custom set.
- Name your set. Use a name that clearly describes the locations, like "Major Donor Cities" or "Annual Conference Locations."
- Proceed with setting up your campaign.
Your new set is saved to your account, so you can use it again in future campaigns.
Using these filters just once? You don't need to save them as a set. Just continue building your campaign as usual. Your custom geofilters will apply only to this campaign.
Setting a Default Geofilter Set
You can designate one saved Geofilter set as your default. When you create new campaigns, the default set will automatically apply, saving you even more time.
To set a default:
- Go to Account Settings > Account > Geofilters in your Feathr account.
- Find the set you want to use as your default.
- Click the Assign as Default option for that set.
When you create a new ad campaign, the campaign wizard will automatically use your default geofilter set. You can change to a different saved set or switch to custom geofilters at any time during campaign creation.
Common Questions
Which campaigns require geofilters?
All display ad campaigns require geofilters, except Mobile Geofencing. That includes Historical Geofencing campaigns, which have a Filters step in the campaign wizard.
Do I need to update campaigns that were already running before geofilters became required?
No. Campaigns that were already running when the requirement started in November 2026 will keep running without interruption.
The requirement applies to campaigns you publish going forward. Any display ad campaign you have in draft, and any new display ad campaign you create, will need geofilters before you can publish it. Mobile Geofencing campaigns don't require geofilters.
Why don't Mobile Geofencing campaigns require geofilters?
Mobile Geofencing campaigns already target people inside the specific locations you choose, so your ads are already limited to those places. Historical Geofencing works differently. It reaches people who visited a location in the past, wherever they are now, so geofilters help keep those ads in your target regions.
Can I use a different set than my default for one campaign?
Yes! Your default set applies automatically, but you can switch to another saved set or to custom geofilters for any campaign.
How do I add or change geofilters on a published campaign?
- Click the name of the campaign in your Project to open its report.
- Click Edit in the top right corner.
- Use the Step dropdown in the top left to go to the Filters step.
- Make your changes, then click Save Changes in the bottom right.
My cost per click is higher with geofilters. Is something wrong?
Not necessarily. When your ads focus on your target regions and higher-quality sites, you may get fewer clicks, but those clicks come from more relevant people.
Will geofilters make my audience too small?
They can. Every geofilter narrows your audience, and ad campaigns need at least 2,000 people to serve impressions. If your audience gets too small, try broadening your geofilters, like adding nearby cities or switching from a city to a state. Learn more about audience size.
How many locations can I add to one set?
Each Geofilter Set can include up to 50 geofilters.
Still have questions?
Reach out to Feathr Support at support@feathr.co. We're happy to help!